|
Operating
method |
Flatbed and ADF(automatic document feeder) |
|
Image
sensor |
CCD(charge-coupled device)image sensor |
|
Light
source |
Xe discharge tube(Green) |
|
Document
size |
Minimum:A6 or 4.1 in.x 5.8 in.
Maximum:A3 or double letter(11 x 17 in.) |
|
Paper
weight for ADF |
52 to 127g/m2 (14 to 34 lb) |
|
Output
resolution |
600*3, 400, 300, 240, 200, 150,
100dpi(selectable) |
|
Optical
resolution |
400dpi |
Scanning
speed
(mechanical)
(*2) |
ADF
Simplex scanning |
36 ppm for A4 portrait format at 200 dpi
26 ppm for A3 portrait format at 200 dpi |
ADF
Duplex scanning |
40 ppm for A4 landscape format at 200 dpi
(=80 image per minute)
66 ipm for A4 portrait format at 200 dpi |
|
Flatbed scanning |
2.0 sec. for A4 portrait format at 200 dpi
2.9 sec. for A3 portrait format at 200 dpi |
|
Grayscale
level(internal) |
256 levels image data processing in the scanner |
|
Halftone
patterns |
Dither;Error diffusion |
|
Capacity of
ADF |
Maximum 100 sheets, paper weight 64g/m2,(17
lbs), A4 |
|
Interface |
M3097DE:RS232C+Video; M3097DG:SCSI-2 |
|
Video
output |
| M3097DE: |
Binary, 8-bit gray level(through option slot)*1 |
| M3097DG: |
Binary, 8-bit gray level*1 |
|
|
Power
requirements |
100-120 VAC 50/60Hz, 200-240 VAC 50/60Hz, 120 VA or
less |
|
Operating
environment |
Temperature:5-35 degrees Centigrade (42F to 95F)
Relative humidity:20%-80%(noncondensing) |
|
Dimensions(WxDxH) |
696x497x234 mm(27x19.6x9.2 in.) |
|
Weight |
20 kg(44.2 lbs) |
|
Options |
1.IPC 2D board
(1)IPC functions
-Dither pattern download
-Automatic binarization
-Automatic separation between photographs and text
-Zooming:25% to 200% by 1% steps
-Outline extraction
-Image emphasis
-Mirror image
-Reverse image
-Clipping
(2)DTC functions
-Spot noise removing
-Dynamic threshold
-Gamma curve correction
-Filtering
-Threshold curve selection
-Smoothing
2.IPC 3D
-The functions are the same as IPC 2D's. The DTC is
enhanced. |
|
Others |
| M3097DE: |
16MB memory pre-installed |
| M3097DG: |
16MB memory & compression pre-installed |
|