The Adaptec SANbloc S50 JBOD is the simplest way to integrate the performance, reliability, and cost-effectiveness of Serial Attached SCSI (SAS) into your storage strategy. Whether you are creating or scaling your storage solution, the Adaptec S50 enables you to scale to multiple terabytes of data capacity. Use low-cost Serial ATA (SATA) or high-performance SAS drives to achieve the right balance of performance and cost.

The SANbloc S50 JBOD is perfect for data intensive and performance intensive applications. SAS host connections transfer terabytes of data at speeds up to 1200MB/s.

• Choose SAS or SATA drives to balance performance, reliability and cost
• Meet growing data demands with 9TB of SATA storage or 3.6TB of SAS storage
• Point-to-point connectivity isolates drive failures, increasing reliability and performance

High availability, exceptional scalability and superior performance for high-bandwidth applications.

Benefits  

Ability to use SAS and SATA drives to achieve the right performance, reliability, and price.

Key Differentiators  

Point-to-point connectivity isolates drive failures, increasing reliability, and fault tolerance and improves performance.
Meet your growing data demands with your choice of 9TB of SATA storage or 3.6TB of SAS storage

Maximum Capacity  

SATA: Up to 12 drives (9TB) capacity per 2U enclosure
SAS: Up to 12 drives (3.6TB) capacity per 2U enclosure
(Expansion for Snap Server 520 Systems requires optional Snap Server SAS HBA)

Hot Swappable and Redundant Components  

Two advanced power and cooling modules (APC)
Two independent AC power inlets
Up to 12 drives
No active components on data path

Disk Drive Interface  

Twelve independent 300MB/s point-to-point connections to each SAS or SATA disk drive

Disk Drives  

Capacity: Up to 750GB
Rotational velocity: 7200 RPM, 10K RPM, 15K RPM
Interface: 3Gb SAS; 3Gb/1.5Gb SATA II
Form factor: 3.5in. form factor, 1.0in. height
Supported drives: Only S50/Snap Server disk drives

Host Interface  

One SAS I/O module supports one SAS connection
SAS connections can be used for host connections or as a combination of host connection and expansion
Each SAS connection supports up to 1,200MB/s

Measured Performance  

Up to 750MB/s (sustained reads)

I/O Module Features  

Single controller
SAS and SATA support
Autonegotiate speeds
Inband and out-of-band management
SMP and SSP command/protocol support

Maximum SAS Cable Length  

Up to 3m

Monitoring  

Temperature, advanced power and cooling modules including fan speed control, disk drives, and I/O module, as well as error rates and quality of service on each SAS.

Failure Notification  

SCSI enclosure services (SES-2) over I2C physical interface, LEDs, audible alarms, FRU (field replaceable unit) revision and serial number reporting, events reported to storage management software.

AC Power  

Input voltage: Autoranging, 85-264 VAC
Input frequency: 47-63 Hz
Power factor correction: Per EN61000-3-2
Input current: 100-240 VAC @ 4-2.5 A
Output power: 491 W peak, 430 W average

Height  

3.5 inches (89mm)

Width  

17.6 inches (447mm)

Depth  

19.5 inches (495.3mm)

Weight with Drives  

60 lbs (27 kg) max

Warranty  

3-year system warranty

The SANbloc S50 JBOD can be used for expansion to selected Snap Server Models utilizing Instant Capacity Expansion (I.C.E.) providing additional RAID storage for file and block storage sharing.

Additionally, the SANbloc S50 can be used for direct attach storage to servers with the inclusion of Adaptec 4800SAS/4805SAS RAID Controllers.