15 to 60 Cartridge library capacity, and 1 to 6
DLT8000 tape drives
•
Bar code reader, standard
•
Fibre Channel attachment support by IBM
2108-RO3 SAN Data Gateway Router
•
Rack mountable or desk-side
•
Redundant (2nd) Power Supply
•
Ten cartridge entry-exit port
•
7 X 24 IBM Warranty and Service
Overview
The IBM 7337 Digital Linear Tape Library
Model 360 is an automated tape library incorporating DLT8000 Tape Drives and
attaching to RS/6000 and RS/6000 SP servers supporting AIX(TM) with a LVD
Small Computer Systems Interface (SCSI).
The 7337 Model 360 library can be configured with one to six IBM DLT8000
tape drives. Multiple drives offer enhanced functions such as faster
transfer of data, simultaneous backup, concurrent read/write operations, and
fault tolerance.
The IBM 7337 Model 360 is a stand-alone unit. With an optional feature, the
7337 Model 360 can be mounted in an industry-standard EIA-310-D 19-inch
rack. The IBM 7337 Model 360 utilizes DLTtapeIV tape cartridges providing 40
GB native capacity and up to 80 GB with 2:1 hardware data compression,
giving the 7337 Model 360 typical storage capacities of up to 2.4 TB and 4.8
TB (with 2:1 compression). The 7337 Model 360 has a per drive native data
rate up to 6 MB per second and up to 12 MB per second with 2:1 compression.
A bar code reader is included.
The IBM 7337 DLT8000 Digital Linear Tape Library can be used for
save/restore, program distribution, migration, data interchange, automatic
migration of data between disk storage and tape, and mass storage for data
archive. Storage and tape management for the 7337 Model 360 is provided by
software such as Tivoli Storage Manager and other industry-leading
compatible software offerings.
Highlights
•
Supports from one to six
industry-standard DLT 8000 drives, and between 15 and 60 storage slots
•
Standard single cartridge I/O port with
optional 10 cartridge I/O port feature
•
Rack mounted (14 EIUs) or floor-standing
automated tape storage
•
Up to 2.4 TB of fast, automated and
reliable data storage (4.8 TB of data compressed 2:1) at a 36 MB/sec
data transfer rate with six drives in operation (72 MB/sec with 2:1
compression)
•
Broad-based independent software vendor
(ISV) support
•
Cartridge handler and bar code reader
standard
•
Physically lockable door and front-panel
LCD display
•
Ultra2/Wide, Low Voltage Differential
(LVD) interface
Overview
The IBM 7337 Model 360 Scalable Digital
Linear Tape library is an automated tape library incorporating DLT 8000 Tape
Drives and attaching to IBM
pSeries* and RS/6000* servers and workstations supporting AIX* with a Low
Voltage Differential (LVD) SCSI interface.
The IBM 7337 Model 360 can be configured with one to six IBM Model 360 tape
drives and between 15 and 60 cartridge slots. Multiple drives offer enhanced
functions such as faster transfer of data, simultaneous backup, concurrent
read/ write operation, and fault tolerance.
The IBM 7337 Model 360 is a standalone unit. With an optional feature, the
IBM 7337 Model 360 can be mounted in an industry-standard EIA-310-D 19-inch
rack. The IBM 7337 Model 360 utilizes DLTtape IV** tape cartridges providing
40 GB native capacity and up to 80 GB with 2:1 hardware data compression,
giving the IBM 7337 Model 360 typical storage capacities of 2.4 TB and 4.8
TB (with 2:1 compression). The IBM 7337 Model 360 has a per-drive native
data rate of up to 6 MB/sec and up to 12 MB/sec with 2:1 compression. A bar
code reader is included.
The IBM 7337 Scalable Digital Linear Tape Library can be used for save and
restore,programdistribution,migration, data interchange, automatic migration
of data between disk storage and tape, and mass storage for data archiving.
Storage and tape management for the IBM 7337 Model 360 is provided by
software such as Tivoli Storage Manager** and other industry-leading
software offerings. The IBM 7337 Model 360 is compatible with previous
products, such as the IBM 7205 Model 311 and the IBM 7337 Models 305 and
306.
With the IBM 7337 Model 360, the customer receives an initial configuration
of 15 slots and a one cartridge I/O slot capability. If more storage slots
are needed, 15 slots can be added by ordering FC 8009. If more I/O is
necessary, 10 I/O slots and five bonus storage ports are available by
ordering FC 8012.
Media
Media for the IBM 7337 Model 360 can be
ordered from IBM Media or Supplies Distribution or from authorized dealers.
To order IBM media and supplies in the United States or Canada, call
1-888-IBM-MEDIA (1-888-426-6334) today.
At a Glance
Characteristics
Number of tape drives
From one to six, by addition of FC 8003
Number of cartridge slots
From 30 to 60 by addition of FC 8009
and/or FC 8012
Single cartridge capacity
40 GB (80 GB with compression) with 1,828
ft. DLT tape IV media cartridge (p/n 59H3040)
Library capacities
0.6 TB - With 15 cartridges and no
compression
1.2 TB - With 30 cartridges and no compression
4.0 TB - With 50 cartridges and FC 8012 configured as 10 Slot I/O Port
and 2:1 data compression
4.8 TB - With 60 cartridges and 2:1 compression
Warranty
24 x 7, One year, IBM on-site repair
Color
Black
Dimensions
EIA Units
14 EIA Units (if rack mounted)
Height
68.5 cm (27.0 in) stand-alone with
casters
Width
48.1 cm (18.9 in)
Depth
73.5 cm (28.9 in)
Weight
116.6 Kg (257 lbs) (with 6 drives, 60
cartridges)
Operating Environment
Temperature
10° to 38° C (5° to 100° F)
Relative humidity
20 to 80 percent
Wet bulb
26° C (78.8° F) maximum
Power requirements
6.0 amps at 100 V AC, 3.0 amps at 240 V
AC maximum configuration
Systems Support
The IBM 7337 Model 360 attaches to
selected pSeries and RS/6000 servers and workstation models via #6205
PCI dual channel Ultra2 SCSI Adapter (LVD/SE with VDHCI connector). This
adapter is used in the following RS/6000 models:
7013-S7A, 7015-S7A, 7017-S7A, 7017-S80
7025-F40, 7025-F50, 7025-F80, 7025-H70
7026-H50, 7026-H70, 7026-H80, 7026-M50
7043-150, 7043-240, 7043-260, 7043-270
7044-170, 7044-270, 7046-B50
Do you see the tape library that you are looking for?
If so please contact us at 800-663-5523 or click
here.
If you can't seem to find your librry, please
click here?