 |
| DLT8000 or DLT1
technology |
| Error recovery/retry
capability |
| LCD for
configuration, customization, and usage monitoring |
| Data security -
autoloader can be password protected to prevent unwanted access |
| Sequential or random
(library) access to data cartridges |
| Removable cartridge
magazine safely transports data cartridges |
| Mail slot capability |
| Remote management via
the Web with the optional Remote Management Control (RMC) card |
| LED status indicator |
 |
| Technology |
DLT8000 * |
DLT1 * |
| Capacity |
360 GB (nine DLT tape IV media) |
360 GB (nine DLT tape IV media) |
| Sustained native transfer rate |
6-MB/sec |
3-MB/sec |
| DLT cartridge capacity |
40 GB native |
40 GB native |
| Robotics MSBF |
One million swaps |
One million swaps |
| Robotics MTBF |
100,000 hours |
100,000 hours |
| Robotics MTTR |
Less than 30 min |
Less than 30 min |
| Drive MTBF |
250,000 hours at 100% duty cycle
(not including heads) |
200,000 hours at 100% duty cycle |
| Drive head life (hours) |
50,000 |
30,000 (tape motion) |
| Cleaning cartridge tape |
DLT cleaning cartridge |
DLT1 cleaning cartridge |
| Media life |
One million passes |
One million passes |
| Average tape exchange time |
35 sec |
35 sec |
| Average access time |
60 sec |
68 sec |
| Tape load time to BOT |
37 sec |
59 sec |
| Tape upload time from BOT |
17 sec |
17 sec |
| Tape rewind time |
120 sec |
135 sec |
| Operating interface |
HVD SCSI |
LVD/SE SCSI |
| Control panel |
Backlit LCD status
display; Select buttons to scroll menu items; LED indicator light
(operation/fault status/diagnostic); Optional full-screen view of
cartridges with barcode numbers and drive ID |
| * DLT8000 is
read/write compatible with DLT7000 and DLT4000; DLT1 is read
compatible with DLT4000 only. |
 |
| Communications |
| DLT8000 |
Dual-Channel,
Differential UltraSCSI or Ultra Differential Fast/Wide SCSI Host
Adapter |
| DLT1 |
Dual-Channel
Single-Ended UltraSCSI or SBus Single-Ended Fast/Wide Intelligent
SCSI-2 Host Adapter |
| Note: Recommended
maximum of two Sun StorEdge L9 autoloaders per host adapter. |
 |
| Host Software |
Solaris[tm] Operating
Environment v2.6, 7, 8
VERITAS NetBackup software v3.2 or later (DLT8000), 3.4 or later
(DLT1)
Solstice Backup[tm] software v5.5.1 or later |
 |
| Platforms |
Sun Ultra[tm] 2, 5,
10, 60, 80 workstations
Sun Enterprise[tm] 5S, 10S servers
Sun Enterprise 220R, 250, 280R, 420R, 450 servers
Sun Enterprise x000 and x500 servers
Sun Enterprise 10000 servers
Sun Blade[tm] 100 and 1000 workstations |
| Note: High-voltage
differential host adapter is required for DLT8000; single-ended
host adapter is required for DLT1. |
 |
| Power |
| AC voltage (minimum) |
100-240 VAC (autoselecting) |
| Frequency |
50-60 Hz |
| Power inlet |
Standard AC cord with
hot-neutral ground |
| Average running |
100-127 V, 1.0 A;
220-240 V, 0.5 A |
| Power consumption |
| Typical: |
100 W |
| Maximum: |
125 W |
| Stand-by: |
14 W |
 |
| Operating |
10ºC to 35ºC ( 50ºF
to 95ºF)
20% to 80% relative humidity, noncondensing |
| Nonoperating |
-35ºC to 65ºC ( -31ºF
to 149ºF)
10% to 90% relative humidity, noncondensing |
| Maximum heat dissipation |
425-BTU/ hr; 105 kCal/
hr; 125 W |
 |
| Meets or exceeds the
following requirements: |
| Safety |
UL 1950 listed; CSA
C22.2 No. 950; TUV-EN 60950 |
| Emission |
FCC Part 15B Class B;
CE Mark; VCCI Class 2; VDE 0871/ 6.78; C-Tick |
 |
| |
Desktop |
Rackmount |
| Height |
23.5 cm (9.25 in.) |
21.9 cm (8.63 in.) |
| Width |
22.9 cm (9.0 in.) |
21.9 cm (8.63 in.) |
| Depth |
66 cm (26.0 in.) |
66 cm (26.0 in.) |
| Weight |
24.7 kg (54.3 lb.) |
22.0 kg (48.3 lb.) |
| Shipping Weight |
28.9 kg (63.5 lb.) |
26.1 kg (57.5 lb.) |
