| Specifications
|
| System requirements
|
| Hardware |
Any Compaq NonStop™ Himalaya
K-series or S-series server |
| Software |
Compaq NonStop™ Kernel
operating system, any supported software release, D38 or D45 or later
(K-series) or G06 or later (S-series) |
| Controller (K-series)
|
3216 fiber-optic channel tape
controller |
| Controller (S-series)
|
Processor MFC SCSI port (68-pin
copper) ServerNet/DA adapter, either SCSI or fiber interface
|
| Performance
|
| Tape medium |
DLT half-inch cartridge
|
| Cartridge size |
10.4 cm x 10.4 cm x 2.54 cm (4.1
in x 4.1 in x 1.0 in) |
| Tape length (CompacTape IV)
|
519 m (1,700 ft) |
| Recording format |
128-track serial serpentine,
variable block |
| Data format |
ECMA-approved, ANSI-proposed DLT
|
| Storage capacity |
Native 2:1 Compressed
|
| CompacTape IV cartridge
|
35 GB |
70 GB |
| CompacTape III XT cartridge
|
15 GB |
30 GB |
| CompacTape III cartridge
|
10 GB |
20 GB |
| Recording density |
85,937 bpi per track (extended
1,778-ft tape) |
| Encoding method |
RLL 2,7 |
| Data compression |
DLZ compression |
| Data transfer rate* |
5.2 MB/s max., uncompressed; 10
MB/sec max. with 2:1 compression |
| Hard error rate |
1 x 1,017 bits read |
| Undetected error rate
|
1 x 1,030 bits read |
| Repositioning time |
1.3 seconds |
| Environment
|
| Power requirement |
100-120/220-240 V (voltage
selection switch) |
| Power consumption |
113 W typical per drive
|
| Noise level |
35 dB |
| Operating
|
| Temperature |
10° to 40° C (50° to 104° F)
|
| Noncondensing humidity
|
20% to 80% |
| Altitude maximum |
2,400 m (8,000 ft) |
| Nonoperating
|
| Temperature |
-40° to 66° C (-40° to 150° F)
|
| Noncondensing humidity
|
10% to 95% |
| Altitude maximum |
9,100 m (30,000 ft) |
| Physical
|
| 5157/5159 DLT7000 tape
drive |
| Height |
12.4cm (4.87 in) |
| Length |
32.5 cm (12.75 in) |
| Width |
23 cm (9.0 in) |
| Shipping weight |
10.1 kg (22 lb 4 oz)
|
| 5157ACL tape drive
|
| Height |
12.4 cm (4.87 in) |
| Length |
32.5 cm (12.75 in) |
| Width |
43 cm (17 in) |
| Shipping weight |
25 kg |
| 5158ACL tabletop tape
drive |
| Height |
25 cm (10 in) |
| Length |
56 cm (22 in) |
| Width |
55 cm (22 in) |
| Shipping weight |
26.8 kg (59 lb) |
| 7186 cabinet
|
| Height |
95.5 cm (37.6 in) |
| Length |
81.3 cm (32 in) |
| Width |
55.2 cm (22 in) |
| Weight |
32.2 kg (71 lb) |
| 7187 cabinet
|
| Height |
182.7 cm (71.7 in) |
| Length |
81.3 cm (32 in) |
| Width |
55.2 cm (22 in) |
| Shipping weight |
53.5 kg (117.2 lb) |
| 7188 cabinet
|
| Height |
86.6 cm (34.1 in) |
| Length |
81.3 cm (32 in) |
| Width |
55.2 cm (22 in) |
| Shipping weight |
21.3 kg (47 lb) |
| Regulatory
|
| The 5157/5158 subsystems meet
pertinent safety and regulatory requirements including FCC, UL, TUV, VDE,
CSA. |
